Zhejiang Sunpro Power Technology Co Ltd SPDG590-N144M10

Mono-c-Si
590 W Pmax
51.7 V Voc
14.48 A Isc
42.87 V Vmp
13.77 A Imp
23.43 % eff.
0.7885 FF
72 cells
IV & PV Curves at STC (1000 W/m², 25 °C)
IV Curves at Multiple Conditions

Irradiance sweep at 25 °C

Temperature sweep at 1000 W/m²

Single-Diode Model Parameters

Source: California Energy Commission module list · retrieved via SAM library · energy.ca.gov · All data sources

Parameter Symbol Value Unit
Nameplate (STC)
STC Power STC 590.32 W
PTC Power PTC 561.0 W
Open-circuit voltage V_oc_ref 51.7 V
Short-circuit current I_sc_ref 14.48 A
Max-power voltage V_mp_ref 42.87 V
Max-power current I_mp_ref 13.77 A
Fill factor FF 0.7885 —
Efficiency (STC) η 23.43 %
Temperature Coefficients
Isc temperature coefficient alpha_sc 0.006226 A/°C
Voc temperature coefficient beta_oc -0.129767 V/°C
Pmax temperature coefficient gamma_r -0.295 %/°C
NOCT T_NOCT 43.4 °C
Single-Diode (De Soto) Parameters
Modified ideality factor a_ref 1.78464 V
Light-generated current (ref) I_L_ref 14.48745 A
Saturation current (ref) I_o_ref 3.77e-12 A
Series resistance R_s 0.23294 Ω
Shunt resistance (ref) R_sh_ref 452.614 Ω
Cells in series N_s 24 —
CEC Adjust factor Adjust -3.0884 %

The CEC list gives 24 cells in series, which puts 2.15 V on each cell. A silicon cell gives 0.55 to 0.80 V, so PV Ivy uses 72 cells in series for the .PAN file and Similar Modules, found from the model name (144 half cells).

Actions
Module Specifications
Technology Mono-c-Si
Bifacial No
BIPV No
Cells in series 72 (inferred, CEC lists 24)
Module area 2.52 m²
NOCT 43.4 °C
Temp. coefficient of Pmax -0.295 %/°C
Temp. coefficient of Voc -0.251 %/°C
Temp. coefficient of Isc 0.043 %/°C
CEC list On the 23 Jun 2026 list
Parameters from 23 Jun 2026 list
Measured Data
No measured data yet for this module.
Related Models
Similar Modules

Other manufacturers, same technology and cell count, power within 3 %.

Was this page useful?

© 2026 PV Ivy. All Rights Reserved.