Solmetric Project Builder
Beta
Enter the site, module and array layout once. PV Ivy writes the Solmetric
PV Analyzer project file (.pvapx) with Site Info filled in and
every inverter, combiner and string in the Array Navigator already named the
way your crew labels them. Open it in PV Analyzer and start tracing.
Beta. Check the project in PV Analyzer before you go to site. Generated files were tested in the PV Analyzer PC software (October 2026) on test projects with fixed-tilt and tracker sites, harness levels and large sites, and opened with Site Info and the Array Navigator filled in. The CSV manifest lists every string by its full name, so you can work from it if a file does not import. Report an import problem.
PV Ivy does not have the temperature data PV Analyzer needs for this module, so the project file leaves the module out. PV Analyzer asks you to pick it when you open the file.
Design low temp sets the cold-morning string Voc in the summary. Use the site's record low or the ASHRAE extreme annual minimum.
{n} is the node's own number and {i} is its parent's. Add :02 to pad to two digits.
First names:
Click any name to rename that one node. Click a string count to change it for one combiner or harness. Edited names and counts show in green and go into both downloads.
Was this page useful?
Thanks. Every note is read.
© 2026 PV Ivy. All Rights Reserved.